AbstractThe electro-mechanical pipe systems that run through longitudinal or transverse holes in the secondary reinforced concrete (RC) beams can enhance the maximum floor height of the building. In this work, the effect of longitudinal hole size on the flexural behavior of RC beams has been studied experimentally. Furthermore, studies were conducted to determine whether carbon fiber reinforced polymer (CFRP) may enhance the flexural response of hollow-sectioned reinforced concrete (RC) beams. The ultimate load and related deflections were reduced by the holes, regardless of their size. Regardless of the size of the hole and the CFRP arrangement, the application of CFRP increased the ultimate loads and cracking loads of beams by a maximum of 22% and 14%, respectively. Every tested solid beam exhibited flexural shear behavior. In the end, using CFRP rope for strengthening led to a 22% increase in energy dissipation; however, as the hole's size increased, this increases reduced.